Pergola for roses



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Pergola for roses - openwork support for climbing plants, made in various configurations. For several centuries, the art of erecting canopies, arbors, arches from lattice structures twined with greenery and clematis flowers was honed. Pergola got its start as a support for grapes and later it became popular among gardeners.

Support requirements for roses

Before planting climbing roses in the country, it is necessary to get rid of the stereotype that they themselves will find where to cling. Qualities necessary for arranging a pergola:

  1. Reliability of a design. Flowering climbing bush is very heavy, so the supports should be stable and durable. It is desirable to dig in the bearing part and then fix the grids for climbing roses.
  2. Decorative design. A rose is a flower of marvelous beauty, and it should harmoniously fit into landscape design.
  3. Matching each variety of colors. Delicate, light and miniature grilles are more suitable for small, low colors such as clematis. Bulky structures, arcades, gazebos are designed for tall climbing roses.
  4. Compactness. Not everyone can afford to arrange a gazebo in a small area. But a small support, a tripod or an original arch at the entrance, entwined with roses or clematis, is accessible to everyone.
  5. Profitability. This is a simple design, and you can assemble a pergola with your own hands from improvised material. There are similar metal structures on sale, but, firstly, they are not cheap, and secondly, what is on sale is not always suitable for the layout of the site.

Most often in small garden plots trellises are used to facilitate the placement of a weaving rose next to any building.

Materials for the manufacture of pergolas for roses

Most owners of summer houses, private houses and cottages erect various types of gazebos and awnings, not intending to make a simple construction of pipes and boards to plant several climbing roses and other climbing plants. Pergola is not just a subject for maintaining clematis. Covered with decorative flowers, it can:

  • perform the function of transition from one part of the garden to another;
  • act as a connection between buildings;
  • replace part of the wall on the veranda;
  • Create shady alleys.

Materials for manufacturing are selected from the photo, depending on the structural and design features of the design. The most popular are supports and trellises made of metal and wood, stone buildings are very rare.

Forged pergolas in a stone frame and entwined with branches of climbing roses or clematis look original. Such a building beckons with its shadow and brings tranquility in any weather.

Wooden supports are used in straightforward structures. When alleys are made for tall climbing plants, arbors and various decorative fences, a thin lath and a lacquered beam are used.

But the most popular is metal pergola. Its peculiarity lies in flexibility, in the possibility of giving any shape, in the simplicity of metal construction. All this allows you to craft various trellises yourself.

Pergolas as a support for climbing roses

DIY do-it-yourself support

In order to build a good metal structure for climbing roses, you need to determine the location, shape and material. The most interesting looks and is distinguished by its durability metal pergola. It can be made of fittings and pipes of various diameters.

When choosing a shape, it is necessary to take into account that the width of the building should be greater than the height. Narrow and tall pergolas are unstable. The most stable do-it-yourself pergola is a square or a wide arch. The flexibility of the pipes allows you to perform the fungi of various configurations. You can weld bent rods in the form of any animal or ball, comfortably attaching it to the lawn.

For the manufacture of the base, round or square shaped pipes are used, cut and connected to each other by welding. In between, you can run wire or rods of various diameters.

Pergola made of metal with your own hands can be stationary and portable. In the first version, the foundation is poured under the metalwork with the installation of pipes or fasteners for them, the foundation is prepared.

Apply a stationary installation under the arbor and canopies. Climbing roses and clematis are planted from the outside and weave along the gratings between the pipes. When the plant does not completely cover the area of ​​the support, it has a very attractive appearance.

In the second case, the base is welded so that the metal structure is rigid and does not deform when transferred from place to place. Usually, when moving and installing on a new site, several types of fasteners are used. The most reliable and easiest is the reinforcement hammered into the ground and the base of the metal structure tied or bolted to it.

The variety in the implementation of elements of design thoughts does not exclude the combined execution of garden decoration. These include:

  • metal - wood;
  • metal is stone;
  • wood is stone.

Fences and awnings made in a mixed style and braided by lovely roses and clematis look especially beautiful.

DIY Pergola

Pergola in design

Currently, arches for climbing plants are gaining high momentum. It has become popular to hold weddings and take photos with similar decorative elements. The beauty and originality of the species favorably distinguish the pergola from the entire garden architecture.

Arched corridors of climbing plants, roses-covered verandas and arbours, hedges, houses, along the walls of which branches of a blooming clematis extend into fashion, have come into fashion. Landscaping is becoming more and more popular every year.

It’s not enough for anyone to collect a base from a snag and twigs for a climbing plant. But as a result, having a wonderful gazebo at no particular cost, you can safely relax in the shadow of clematis after a hard day and send a photo with an image of an unusual type of bungalow.

Tapestries are part of the pergola, but can be a freestanding decorative panel. They are a simple lattice made of metal or wood.

Wooden trellises are lateral parts located between the main columns of pergolas. They are made of thin rails and therefore very fragile. Metal gratings are more durable, which allows their use for heavier plants, giving them the most fantastic shapes.

Performing many functions and being an integral part of the landscape, the pergola requires constant care. Rain, temperature changes and other external influences adversely affect any surface. Therefore, it is necessary to periodically clean and cover pergolas, trellises and other surfaces with weather-resistant coatings.

Each owner of a summer house or private house wants to have a shaded cozy corner in his garden, and pergola is the most optimal solution to this issue. After all, it can be in the form of a gazebo and serve as a support for weaving flowers and grapes.



Comments:

  1. Kigagami

    In it something is. Thanks for the help in this question how I can thank you?

  2. Bhric

    Bravo, excellent communication

  3. Michele

    I think he is wrong. I'm sure. Let us try to discuss this. Write to me in PM, it talks to you.

  4. Ryman

    Damn, what the hell !!!!!!!!!!!!!!!!!



Write a message


Previous Article

Charlotte without flour: choosing the perfect recipe

Next Article

Why lavender fades